Gatemate Heavy Reversible Hinges
Traditional Style Heavy Duty Hinge Designed for wood Gates.
Available in Hot dipped Galvanized or Premium Shell Finish.
7"-18" come 5 pairs per box. 24"-48" come 2 pairs per box.
Stainless Steel Fasteners included with Premium Shell Black, Galvanized Fasteners included with Hot Dipped Galvanized Hardware.
How to Install the Heavy Reversible Gate Hinge:
1. Place the hinges onto the door/gate in the desired positions adjusting the overhang of the pins so they are central on the post or door frame. Fix hinges to the gate with the bolts and screws provided.
2. Place the door/gate into position and support allowing correct clearances between the post/frame.
3. Place the cups onto the pins and fasten the cups to the post or door frame with the screws provided.
4. May grease for smooth operation.
Directions are for guidance only. Requirements may vary due to individual circumstances. We recommend drilling smaller pilot holes before screwing to reduce the chance of splitting wood, and when going completely through wood products, drill from both sides.
Write a reviewYour Name:
Your Review: Note: HTML is not translated!
Rating: Bad Good
Enter the code in the box below: